Sorry to haarp on, but see here

Haarp, lol,

Did you do these experiments yourself? The results are pretty amazing. Could you bring some busters to the meeting if you have any in stock?  I think a mate in leeds might want some too.  

--Last edited by Uselesseater on 2007-08-05 16:17:58 --

That last one was my own experiment. The supersize sperm formation was a little bit of a surprize.I've got a bigger jug formation on a bigger jug stood on an orgone mat to show soon.
That small column apparently suddenly expands outwards so could be good to keep in your fridge

As posted

I took some orgonite to work and put one in the garden and on in the switch room next to the 11kv mains cable. I'll be monitoring the leccy bill from now on for any changes.

dh, do you plan any more expreiments? If you could show the effect of a cable with current running through it on freezing water than you could do the same thing with orgonite present and compare the results. I'm not sure how you would get the freezer door to seal with a cable hanging out though.

Also, have you tried freezing water with a mobile phone next to it? I have a couple of old phones which you could use for this as it might ruin them. I would be very interested to see what ice looks like when frozen next to a phone. You could call the phone during the experiment and then repeat the process with orgonite present.

Yes, as you say the cable/door situation provides a problem, you might be able to do it with a chest freezer. Anybody got one?
The mobile idea sounds feasible and interesting. If I can dig out my old mobile I'll try it.
I hope you manage to reduce your electricity consumption.All I can report is my large rebate and drastically reduced monthly payments after using orgonite on the incoming supply,despite adding more electric equipment to my inventory.
I'm thinking of how to construct a fuel treatment unit for the car engine. After all, the Ecoflow unit is supposed to reduce fuel consumption through the use of "reverse polarity" magnets, and I don't see why an orgonite + rare earth magnet based device shouldn't be even more effective. I would guess that we could produce a "reverse polarity" effect by having the same pole of the magnet facing in on each side of the fuel line. I see catfish dave is back posting, and if we could use his Joe Cell system combined with an orgone fuel treatment we ought really be able to get 70-100 mpg.
I've integrated a gold-plated high gauss neodymium magnet into my prototype design for a personal protection pendant, which I think will be just as effective and a damn sight cheaper than the Don Croft Harmonic Protector. Just some adjustments to the ingredients and design to make. I'm wearing it now - boy! do I feel good! Boy am I becoming a snake oil salesman!  

The other thing we need to do is tackle the Leeds and East Bradford mobile mast colony. A huge task but it really needs doing. We can change the NWO agenda  on the background energetic/etheric  level.This should produce changes both in the sky and on the ground. Christian has covered much of the west of Bradford,as well as Calderdale and areas to the north and south
There are some massive arrays on the Leeds and Bradford borders.
We really need to start gridding out from where you live.
I also intend to install an earth cb in the garden of a friend when she finally gets her move done - to any area on the Leeds and Bradford border. The earth cb does away with the bucket of orgonite, using Old Ma Earth instead,and is a hell of a lot quicker, cheaper and easier to build, and has been condemned by Don Croft & Co as relatively ineffective compared to the traditional model. Personally I'm not so sure, and we can check that judgement by watching the skies  

--Last edited by dh on 2007-08-10 21:49:18 --

I saw that electric saving thing on Don Croft's site...

I'm off to the other board... or is it all being discussed here now? I'm getting too many login names to keep track of

I would like to know where to get the right sort of orgone and where to place it on the leccy meter.

Also my meter is outside and a dog chewed off  the usual white meter cupboard door so will this effect it if open to the elements?

I will re-post this on orgone forum.

davID

Hi davID,
Found that stuff on the neodymium magnets forced together with a penetrating nut and bolt and then dropped down 2 foot aluminium or copper tubes and taking a few seconds to transverse that short distance, on the Earth to Andromeda video, demonstrating an antigravity effect, most illuminating.I think the information came from a former Lockheed research scientist.These are all the elements I'm dealing with now, plus the shrinkage of polyester resin on quartz crystal causing a piezoelectric effect, plus the interface of metal and resin attracting and generating orgone.
I've devised a pendant which I think uses all these elements synergistically to maximum effect over your individual energy body, though they are awfully difficult to construct, and dont usually turn out perfectdue to the magnetic field doing its own thing
Before or on top of the meter would seem to be about right. The vast amount of electrical power is lost down the cable due to the loss of chaotic electrical energy provided
The presence of orgonite organises the electrical flow and allows the devices to use the source with high efficiency.
I would also strongly suggest putting an orgonite device on the incoming water supply. It will not only improve the quality of the water you use, but,due to the attraction and amplification by water of orgone, produce a positive energy influence back thru all courses of the water to the supply station  

--Last edited by dh on 2007-08-16 23:13:11 --

ps The right source of orgone would be some aluminium shavings, some polyester resin - ABL resins -they're not the cheapest but their bog standard is awfully good plus a good source of crystals though in America is orgone crystals
And then follow your own intuition  

--Last edited by dh on 2007-08-16 23:48:53 --

Thanks for that -  am taking a look.

RB25 Layup resin from here is recommended for practical purposes, if you can afford the outlay. It affords you huge numbers of gifts, and is not so smelly and easy to work with. I don't know if there are smaller quantities to work with. If you want more aesthetic qualities, which show the contents then go for more whorls and spirals in your metal content - search out some steel as well as Al content and look at the more expensive clear casting resins.
These don't cure as quickly and have less shrinkage, so take into account whether or not you think the pressure applied to quartz is an important element.
I personally find that lots of spiralling turnings encased in clear resin is exceptionally beautiful, but perhaps that's the (homeopathically-speaking) sulphur element in me.
It is after all just scrap metal encased in plastic  

--Last edited by dh on 2007-08-24 23:05:19 --